Product Details

XR4F

Heavy Duty Euro-Flange Encoder for Hazardous Applications

  • 10mm, 11mm & 18mm Shaft Sizes
  • EURO B5 & B10 Flange Mount
  • Up to 5000 PPR
  • -40°C to +80°C Operation
  • 3 Year No-Hassle Warranty
  • Magnetic Sensors: No Glass Disks
  • Self-Diagnostic LED & Remote Alarm
  • ATEX Rated: Zones 1 & 2, 21 & 22
  • IECEx Rated: Zones 1 & 2, 21 & 22
  • cULus Class I Division 1 Groups A,B,C,D Listed
  • cULus Class I Zone 0 Group IIC
  • cULus Class I Division 2 Groups A,B,C,D Listed
XR4F solid shaft encoders are a unique industry first.  By combining Avtron durable magnetic encoder technology with SMARTSafe™ systems, Avtron has created a truly durable solid shaft encoder which can be used in hazardous environments and applications.  It is ATEX, IECEx & cULus certified.  SMARTSafe encoders can be used in gas and ATEX dust hazard environments.  Also available:  hollow shaft models (XR45, XR685), NEMA style shafted model (XR485), and no-bearing modular encoders (XR56, XR85, XR115, XR125, XR850).

For applications requiring ATEX or IECEx Zone 2 or 22 or UL Class I, Division 2 use the XR4F directly with no barrier, isolator, special connector or cable gland required.

For applications requiring ATEX or IECEx Zone 1 or 21, we offer protection using the XRB3 isolator in your control cabinet to permit intrinsic safety wiring rather than explosion proof conduit or glands.  For applications requiring NEC 500 UL Class I, Division 1, or NEC 505 (c)UL Class I, Zone 0, use the XRB3 isolator remotely and intrinsic safety wiring.

Unlike the competition, the Avtron SMARTSafe encoder systems are protected against short circuits, power-to-output wiring, and output-to-ground faults.  Wiring errors won't harm this system.

Instead of relying on a tiny optical encoder with weak bearings, install the most rugged encoders available.  Vibration, shock, liquids, dust and dirt won't harm SMARTSafe encoders!  Mud pumps, paint booths, hazardous duty IEC motors...XR4F can keep them all working 24/7/365.

Select the Avtron XR4F SMARTSafe encoder to eliminate encoder problems in your hazardous duty application!

Operating Power: (add load and cable drive current as req'd)

   Division 1, Zone 1 (XRB3): 12-24VDC In/Out, 150 mA

   Division 2, Zone 2: 5-24VDC In/Out, 150mA

Output Format: A Quad B with marker (A,/A, B,/B, Z,/Z)

Frequency Range: 0 to 165 kHz

Maximum Cable Length:

   Division 1, Zone 1: Encoder 500' Isolator 1000'

   Division 2, Zone 2 (5 to 12 VDC in): 500'

   Division 2, Zone 2 (15 to 24 VDC in): 250'

Temperature: -40°C to 80°C (storage -40°C to 100°C)

Environmental: IP54 (see manual for details)

Vibration: 5-2000Hz, 20G, 100G Shock

Weight: 10-12lbs [4.5-5.5kg]

Certifications:

   ATEX/IECEx Zone 1 & 21 Group IIC

   cULus Class I Div 1 and Zone 0 Group A,B,C,D*

   ATEX/IECEx Zone 2 & 22 Group IIC

   cULus Class I Div. 2 Groups A,B,C,D

*See installation drawings for Warnings and Limitations.

  • Directly replaces Hubner OG9, FOG9, POG9, POG 9G, POG90, POG10 G, POG 11, POG 11G models
  • Bearings up to 4X larger than competitors models
  • Foot, B5 or B10 Euro Flange Mount
  • Directly replaces Johannes Hubner FG4, FG40 models
  • Fully Potted Electronics Withstand Liquids & Dusts
  • Protected Against Surges and Wiring Problems

No Related Materials Available

Competitive Products

  • XR4F SMARTSafe™ encoders can replace many competitive models including:

    BEI:

    H20, H25, H38, H40 encoders


    Baumer Hubner:

    EEx OG 9, FOG 9, POG 9, POG 9 G, POG 90, POG 10, POG 10 G, POG 11, POG 11 G


    BEI Ideacod encoders:

    GAMX, GEMX IHM5, IHM9, NAMX


    Dynapar encoders:

    X25 encoder


    Pepperl+Fuchs:

    RSI 58X-,RVI 58X-, RVI84, 14-1436X, 14-14361, 14-14366


    And many other hazardous area, intrinsically safe and explosion-proof ATEX rated encoders. 

Related Products

Rating & review

See all reviews